Barco MatrixPRO 16 x 8 Matrix Switcher/Router

Description

PLEASE READ TERMS AND DESCRIPTION CAREFULLY:
BIDDING AND SHIPPING ARE FOR US CONFIRMED EBAYERS FROM THE 48 LOWER UNITED STATES ONLY
WE SHIP UPS GROUND (SIGNATURE REQUIRED) ONLY  NO PO BOXES PLEASE
YOU MUST BE HOME TO SIGN FOR YOUR PACKAGE
WE CAN ONLY SHIP TO
CONFIRMED
EBAY / PAYPAL SHIPPING
ADDRESS
, NO EXCEPTIONS
Item Description
Barco MatrixPRO 16 x 8 Matrix Switcher/Router
Includes
(1) Barco MatrixPRO 16 x 8 Matrix Switcher/Router
Pairs w/Barco Encore Folsom Presentations System
The MatrixPRO series also features I/O grouping. This grouping allows the matrix to be divided into smaller sub-switchers, making installation and control easier. I/O grouping allows specific outputs to be grouped together - such as those designated for a specific video format. Each units features Vertical Interval Switching capability to provides glitch-free switches when used with synchronous video source. RGB delay is used when video is not synchronously locked.
Features
• Universal inputs accept computer up to 1600x1200, composite, s-video,
component video, HDTV, RGBHV and stereo audio 350MHz (-3dB), minimum,
ultra-wideband, fully loaded (One input driving all outputs)
• Stereo audio input and output signals balanced or unbalanced
• Volume control on a per input basis
• Mute on a per output basis
• Three switching modes: direct front panel mode for one-touch operation
(12x4 and 12x8 only), MatrixPRO, a Windows®-based software, or an optional
remote control interface for simple operation
• Audio follow or breakaway mode
• Output audio gain and attenuation (-84dB to +15dB)
• IP (Ethernet) control standard
• Front panel lockout mode (12x4 and 12x8 only)
• Memory presets save individual I/O configurations for recall via the front panel
(12x4 and 12x8 only) or RS-232/485
• I/O grouping allows specific outputs to be grouped together making installation
and control easier
• Vertical interval switching capability provides glitch-free switches when
used with synchronous video source. RGB delay is used when video is not
synchronously locked
• MP software a Windows®-based program for simple setup and control is
supplied with each unit
• An additional RS-485 connector is supplied to allow for daisy chaining multiple
matrix switchers or other Folsom devices
• Large LCD display allows for easy navigation and to provide visual verification
of important information about matrix switcher settings
• Fully field programmable to support upgrades
• Backed by a full 3-year parts and labor warranty
MatrixPRO 12 x 8 Matrix Switcher
VIDEO ROUTING
Gain Unity
Bandwidth 350 MHz (-3dB), fully loaded (one input driving all outputs)
Crosstalk -80dB @ 1 MHz, -65dB @ 10 MHz, -55dB @ 30 MHz, -42dB @ 100 MHz
Switching speed 100 us to 4 seconds (programmable)
VIDEO INPUT
Number/signal type 12, 16 or 32 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video Connectors 12, 16, 32 x 5 are female
Minimum/maximum levels Analog-0.5V to 1.85V p-p with no offset, Impedance 75 ohms
Return loss -30dB @ 5 MHz, Maximum DC offset (Vin=1Vpp) +1.8V, -.6V
VIDEO OUTPUT
Number/signal type 4, 8, 16 or 32 RGBHV, RGBS, RGsB, RsGsBs, HDTV, component video, S-video, composite video, Connectors 4, 8, 16 x 5 BNC female
Minimum/maximum level 2V p-p, Impedance 75 ohms
Return loss -30dB @ 5 MHz, DC offset ± 5mV maximum with input at 0 offset
Switching type RGB delay up to 4 seconds, SYNC Input/output type RGBHV, RGBS, RGsB, RsGsBs, Input level 0.5V to 5.0V p-p, 2.5V p-p normal
Output level AGC to TTL: 4V to 5V p-p, Input/output impedance 75 ohms
Polarity Positive or negative (follows input) AUDIO ROUTING
Gain -84dB to +15dB, Frequency response 20 Hz to 20 kHz, ±0.05dB THD +
Noise 0.03% @ 1 kHz at rated maximum output drive
S/N >90dB, balanced, at rated maximum output drive (21dBu)
Crosstalk <-80dB @ 1 kHz, fully loaded stereo channel separation >80dB @ 1 kHz
CMRR >75dB @ 20 Hz to 20 kHz, AUDIO INPUT
Number/signal type 8, 12, 16 stereo, balanced/unbalanced
Connectors 8, 12 or 16 3.5 mm captive screw connectors, 5 pole
Impedance 10 kohm balanced or unbalanced, DC coupled
Maximum level +19.5dBu, (balanced or unbalanced) at stated %THD+N
AUDIO OUTPUT
Number/signal type 4, 8, 16 stereo, balanced/unbalanced
Connectors 8, 12, 16 3.5 mm captive screw connectors, 5 pole
Output gain adjustment -84dB to +15dB, adjustable per input by RS-232/485 or front
Impedance 50 ohms unbalanced, 100 ohms balanced
Gain error ±0.1dB channel to channel
Maximum level (Hi-Z) >+21dBu, balanced or unbalanced at stated %THD+N
Maximum level (600 ohm) >+15dBm, balanced or unbalanced at stated %THD+N • NOTE: 0dBu = 0.775 volts (RMS) MatrixPRO specifications
The MatrixPRO series also features I/O grouping. This grouping allows the matrix to be divided into smaller sub-switchers, making installation and control easier. I/O grouping allows specific outputs to be grouped together-such as those designated for a specific video format. Each unit features Vertical Interval Switching capability to provide glitch-free switching when used with synchronous video sources. RGB delay is used when video is not synchronously locked.
IF YOU BUY IT AND YOU ARE NOT HAPPY WE HAVE THE 14 DAY MONEY BACK RETURN POLICY READ BELOW
....THANK
YOU
SOLD AS USED AND AS IS
,BUT YOU DO HAVE 14 DAYS FROM DATE OF DELIVERY TO CONTACT US
FOR A REFUND IF YOU ARE NOT HAPPY  : Buyer is responsible for shipping charges back to us
terms shipping and bidding is for bidders from the lower 48 US states only , we ship UPS ground only, no po boxes , BIDDING AND SHIPPING ARE FOR BIDDERS FROM THE LOWER 48 STATES
WE TAKE PAYPAL ONLY