Barco Screen-Pro II 2 HD Video Switcher with SDI Ouput Card

Description

Barco Screen Pro II HD Video Switcher
This listing is for a pre-owned Barco Screen Pro II HD video switcher. This unit is in very good cosmetic condition and operating order. There are the occasional scratches or blemished in the paint, but otherwise this unit is ready for use. This unit has been used in hotel ballroom and corporate events only. Stored in a climate controlled space and is in working order. Unit is sold AS-IS and no returns will be accepted.
ScreenPRO-II uses four image layers (unscaled background, up to two scaled PiPs or keys, and an unscaled downstream key) to produce sophisticated effects, including live transitioning backgrounds, transitioning PiP windows, wipes, dissolves and keys. An internal 8x2 analog video router provides universal analog sources to each scaler schannel. Barco's ScreenPRO-II features a low video processing delay of three input fields maximum. With the EOC, the ScreenPRO-II can use the DVI background channels as inputs to the scaler channels, adds HD-SDI and interlaced output for recording, and can have storage for 100 logo stills.
Full flexibility
Using the mixer’s two scalers, you have the flexibility to mix or key HD-SDI, DVI, and analog source on top of the transitioning background, or display two independent PIPs (or Keys) over a background. In addition, two unscaled high-resolution layers enable you to transition seamlessly between backgrounds, or use a background plus a high-resolution DSK.
Truly seamless
With ScreenPRO-II, the term 'seamless' goes far beyond the system’s ability to create clean, glitch-free switches between inputs. With a typical single-format switcher (such as an all-SDI system), 'seamless' is easy - because input timing is uniform. However,  when multi-format and multi-resolution sources are connected simultaneously, the clean switching challenge arises, and that is precisely where ScreenPRO-II shines.
Enhanced Output Card (EOC)
The EOC card provides an additional output that can be programmed to a different resolution from the Main/Preview outputs. The additional output is provided on the SD/HD/3G/BarcoLink and five-wire formats. The EOC card also enables the DVI inputs to be routed to the scaler channels. Finally, the EOC includes a memory card allowing the storage of up to 100 logo stills.
Features
Transitioning PiP or key on a transitioning background
Native high resolution background channels independent of the PiP/key processing channel
PiP Effects
PiP size from 1/8 to 8X source resolution
Adjustable PiP aspect ratio
PiP borders, including drop shadows and soft edge
Keying
Luminance key
Split key (key alpha and fill)
Reverse key (key on background)
Native high resolution downstream key channel independent of PiP/key processing channels
Numerous mix and wipe effects
Video processing
10-bit processing
1:1 pixel sampling
Motion adaptive de-interlacing (SD & HD)
3:2 and 2:2 pull down detect
Image cropping
Aspect ratio correction
Low video delay - less than 3 input fields
Programmable matte
Z-order control (priority layers) for overlapping PiPs or keys
Mixer dynamically re-assignable as a mixing (transitioning) PiP or as two individual (split) non-transitioning PiPs or keys
Capture and storage of two LOGO images for use as full-screen image or downstream key source
Look-ahead preview
Output synchronization: free-run or vertically locked to NTSC/PAL blackburst, CSync or HD tri-level sync
Architecture supports future addition of optional output modules (for example, a recordable output)
Switcher is sold AS-IS.
NO returns accepted.
NO Warranty