Crestron DM-MD16X16 16x16 DigitalMedia Switcher +2x DMC-DVI 7x DMC-C-DSP Modules

Description

This Listing is for a
Crestron DM-MD16X16 16x16 DigitalMedia Switcher +2x DMC-DVI 7x DMC-C-DSP Modules
What this includes:
Crestron DM-MD16X16 16x16 DigitalMedia
Switcher
+2x DMC-DVI Modules
7x DMC-C-DSP Modules
Power cord
Other modules as shown in the pictures.
Various cables that were used with this unit
Description:
This is a Crestron DM-MD16X16 16x16 DigitalMedia Switcher +2x DMC-DVI 7x DMC-C-DSP Modules.
More Information from the Crestron Web Site:
A fully modular and expandable 16x16 DigitalMedia matrix switcher offering ultra-fast digital video and audio switching, and lossless HD multiroom signal distribution, for all types of AV sources. Provides complete management for SD, HD, UHD, 2K, 4K, and computer signals with advanced HDCP support, EDID resolution management, CEC signal management, USB signal routing, integrated Ethernet switch, simultaneous 7.1 and stereo audio, H.264 streaming, and a full range of selectable input and output types.
Maximum DM 8G® Cable Lengths
Cable Type:
Resolution:
DM-CBL-ULTRA
DigitalMedia™ Ultra Cable
DM-CBL-8G
DigitalMedia 8G™ Cable
Third-Party
CAT5e (or better)
UTP or STP
1080p60 Full HD
330 ft (100 m)
via any DM 8G+ cards
1920x1200 WUXGA
1600x1200 UXGA
2048x1080 2K DCI @24Hz
2048x1080 2K DCI @60Hz
330 ft (100 m)
via "4K" DM 8G+ cards
230 ft (70 m)
via "4K" DM 8G+ cards
165 ft (50 m)
via "4K" DM 8G+ cards
2560x1440 WQHD
2560x1600 WQXGA
3840x2160 Ultra HD
4096x2160 4K DCI
Cable Type:
Resolution:
CRESFIBER8G
CresFiber® 8G
Multimode Fiber
Third-Party
OM3
Multimode Fiber
CRESFIBER8G-SM
CresFiber 8G
Single-Mode Fiber
Third-Party
G.652.D
(or better)
Single-Mode Fiber
1080p60 Full HD
1000 ft (300 m)
via DM 8G Fiber cards
500 ft (150 m)
via DM 8G Fiber cards
7.5 miles (12 km)
via DM 8G SM Fiber cards
1920x1200 WUXGA
1600x1200 UXGA
2048x1080 2K DCI @24Hz
Video
Switcher
16x16 digital matrix, modular input/output cards, Crestron QuickSwitch HD™
Input Signal Types
Configurable via modular plug-in cards supporting HDMI® (DVI & Dual-Mode DisplayPort compatible
[11]
), DVI, 3G-SDI, RGB/VGA, component, S-Video, composite (NTSC & PAL), DM 8G+® & HDBaseT®, DM 8G Fiber, DM 8G SM Fiber, DM® CAT (legacy), DM Fiber (legacy), & H.264 streaming
Output Signal Types
Configurable via modular plug-in cards supporting HDMI (DVI compatible
[14]
), DM 8G+ & HDBaseT, DM 8G Fiber, DM 8G SM Fiber, DM CAT (legacy), DM Fiber (legacy), & H.264 streaming (All input cards also include HDMI pass-through outputs)
Backplane Data Rate
12.5 Gbps
Note: For additional specifications, please refer to the spec sheet for each input and output card.
Audio
Switcher
16x16 digital multichannel audio-follow-video matrix switching, plus independent 16x16 stereo matrix for audio breakaway
Input Signal Types
Configurable via modular plug-in cards supporting HDMI (Dual-Mode DisplayPort compatible
[11]
), 3G-SDI, analog (stereo 2-channel), SPDIF, DM 8G+ & HDBaseT, DM 8G Fiber, DM 8G SM Fiber, DM CAT (legacy), DM Fiber (legacy), & H.264 streaming
Output Signal Types
Configurable via modular plug-in cards supporting HDMI, analog (stereo 2-channel), DM 8G+ & HDBaseT, DM 8G Fiber, DM 8G SM Fiber, DM CAT (legacy), DM Fiber (legacy), & H.264 streaming (All input cards also include HDMI pass-through outputs, and most digital audio input cards also include analog stereo pass-through audio outputs)
Note: For additional specifications, please refer to the spec sheet for each input and output card.
Communications
Ethernet
10/100/1000 Mbps, auto-switching, auto-negotiating, auto-discovery, full/half duplex, DHCP, Private Network Mode
USB
USB signal routing via select input cards, transmitters, receivers, and extenders
[15]
; USB computer console port for setup
DigitalMedia
DM 8G+, DM 8G Fiber, DM 8G SM Fiber, DM Fiber, DM CAT, DMNet™, HDCP 2.2
[3]
, EDID, CEC, PoDM, PoDM+, Ethernet
HDBaseT
HDCP 2.2
[3]
, EDID, CEC, RS-232, PoH, Ethernet
HDMI
HDCP 2.2
[3]
, EDID, CEC
NOTE: Supports management of HDCP and EDID; supports management of CEC between connected HDMI and HDBaseT devices and a control system.
[13]
For additional specifications, please refer to the spec sheet for each input and output card.
Card Slots
1 – 16
(16) DM switcher input card slots;
Each slot accepts (1) DMC-series input card
DM OUTPUTS 1 – 16
(8) DM switcher output card slots;
Each slot accepts (1) DMC-series output card
Connectors
LAN
(1) 8-pin RJ45 female;
10Base-T/100Base-TX/1000Base-T Ethernet port
24ABG / EIG 1 – 16
(16) sets of (1) 4-pin and (1) 3-pin 3.5 mm detachable terminal blocks;
Comprises (16) DMNet ports with "EIG" power selection ports, each set is associated with the corresponding DM CAT output port on any installed DM CAT output card;
Each DMNet port provides power and communications for a DM CAT device connected via DM cable;
Each EIG port connects to an external power supply
[16]
, or to the internal power source via a jumper, to power the DM CAT device connected to the corresponding DMNet port;
Maximum Load: 40 Watts (1.66 Amps @ 24 Volts DC) per port, limited to the available DMNet power from the internal power supply (see "Power Requirements" below) or an external power supply
[16]
100-250V~7.0A 50/60Hz
(1) IEC 60320 C14 main power inlet;
Mates with removable power cord, included
G
(1) 6-32 screw, chassis ground lug
COMPUTER (front)
(1) USB Type B female;
USB computer console port (6 ft cable included)
Controls & Indicators
LCD Display
Green LCD dot matrix, 128 x 64 resolution, adjustable LED backlight, displays inputs/outputs by name, video & audio signal information, Ethernet configuration and setup menus
SOFTKEYS
(4) Pushbuttons for activation of LCD driven functions
HW-R
(1) Recessed pushbutton for hardware reset, reboots the switcher
ROUTE
(1) Pushbutton and red LED, selects ROUTE mode to allow routing changes
VIEW
(1) Pushbutton and red LED, selects VIEW mode for viewing current routes
INFO
(1) Pushbutton and red LED, selects INFO mode for viewing AV and device info
MENU
(1) Pushbutton, steps menu back one level
ENTER
(1) Pushbutton, executes highlighted menu or value
AUDIO
(1) Pushbutton & red LED, selects audio routing view
VIDEO
(1) Pushbutton & red LED, selects video routing view
USB
(1) Pushbutton & red LED, selects USB routing view
Quick-Adjust Knob
(1) Continuous turn rotary encoder, adjusts menu parameters
IN 1 – 16
(16) Pushbuttons and red LEDs, each selects the corresponding input for routing
OUT 1 – 16
(16) Pushbuttons and red LEDs, each selects the corresponding output for routing
LAN (rear)
(2) LEDs, green LED indicates Ethernet link status, amber LED indicates Ethernet activity
Power Requirements
Main Power
7 Amps @ 100-240 Volts AC, 50/60 Hz
Power Consumption
440 Watts typical
Available DMNet Power
110 Watts (4.6 Amps @ 24 Volts DC) from internal power supply
Available PoDM/PoH Power
Refer to the specifications for each DM 8G+ input and output card
Environmental
Temperature
32° to 104° F (0° to 40° C)
Humidity
10% to 90% RH (non-condensing)
Heat Dissipation
1500 BTU/hr
Ambient Noise
31.5 to 36 dBA typical;
29 to 30 dBA idle
Enclosure
Chassis
Metal with black finish, vented sides, fan-cooled
Front Panel
Metal, black finish with polycarbonate label overlay
Mounting
Freestanding or 7 RU 19-inch rack-mountable (adhesive feet and rack ears included)
Dimensions
Height
12.22 in (311 mm) without feet
Width
17.28 in (439 mm), 19.06 in (485 mm) with rack ears
Depth
15.67 in (398 mm) without cards
Weight
28.4 lb (12.9 kg) without cards
All output types are configured in pairs except for streaming (a single streaming output occupies the space of two outputs of any other type). To configure a complete DM switcher with output and input cards, please use the online
DigitalMedia Switcher Configuration Tool
. Current DM switchers use DMC-series “single-gang” output cards. For older DM switchers with
DMCO-series
“multi-gang” output cards, please use the online
Output Card Additions and Upgrades Tool
to update your existing output cards and switcher to the new single-gang output card format.
Crestron control via the DM network requires a Crestron control system, sold separately.
4K, Ultra HD, and HDCP 2.2 are currently supported over HDMI, DM 8G+, and HDBaseT using select input and output cards. Refer to the specifications for each input/output card and each connected device for its full capabilities.
The maximum cable length for DigitalMedia 8G+ (DM 8G+) or HDBaseT is dependent upon the type of cable, the choice of input/output card, and the resolution of the video signal. Refer to the “Maximum DM 8G Cable Lengths” table for a detailed overview. Crestron legacy cable models
DM-CBL
DigitalMedia Cable and
DM-CBL-D
DigitalMedia D Cable support the same resolutions and cable lengths as CAT5e. Shielded cable and connectors are recommended to safeguard against unpredictable environmental electrical noise which may impact performance at resolutions above 1080p. DM 8G+ is compatible with HDBaseT Alliance specifications for connecting to HDBaseT compliant equipment.
The maximum cable length for DigitalMedia 8G Fiber (DM 8G Fiber) is 1000 ft (300 m) using
CRESFIBER8G
multimode fiber optic cable, or 500 ft (150 m) using
CRESFIBER
(legacy) or third-party OM3 multimode fiber optic cable.
The maximum cable length for DigitalMedia 8G Single-Mode Fiber (DM 8G SM Fiber) is 7.5 miles (12 km) using
CRESFIBER8G-SM
or third-party G.652.D (or better) single-mode fiber optic cable.
The maximum cable length for DigitalMedia CAT (DM CAT) is 450 ft (137 m) using
DM-CBL
DigitalMedia Cable. Actual cable length depends upon multiple factors. Up to two DM Repeaters (Model
DM-DR
) may be required.
The maximum cable length for DigitalMedia Fiber (DM Fiber) is 1000 ft (300 m) using
CRESFIBER
(legacy),
CRESFIBER8G
, or third-party OM2/OM3 duplex multimode fiber optic cable.
Refer to the
Crestron DigitalMedia Design Guide, Doc. #4546
for complete system design guidelines. All wire and cables are sold separately.
Streaming output supports 2-channel stereo audio only. Multichannel surround sound audio sources cannot be streamed unless downmixed to stereo. Stereo downmix capability requires a “DSP” type DM switcher input card, sold separately.
Any HDMI input can support a DVI or Dual-Mode DisplayPort signal using a suitable adapter or interface cable.
Item(s) sold separately.
Control of third-party HDBaseT devices using CEC is only supported via “4K” DM 8G+ input and output cards.
DVI output is supported via an HDMI output port using a suitable adapter or interface cable.
CBL-HD-DVI
interface cables are available separately.
Manages the routing of USB HID signals between peripheral DM devices and input cards that are equipped with USB HID ports. Also programmable to manage the routing of USB signals between Crestron USB over Ethernet Extender modules (
USB-EXT-DM
, sold separately). Refer to the USB-EXT-DM spec sheet for more information.
For external DMNet power, use a Crestron
CNPWS-75
,
C2N-SPWS300
, or other Cresnet power supply as required. Do not interconnect DMNet with Cresnet.
.
Crestron, the Crestron logo, Auto-Locking, CresFiber, Crestron Toolbox, DigitalMedia, DigitalMedia 8G, DigitalMedia 8G+, DM, DM 8G, DM 8G+, DMNet, QuickSwitch HD, and Sonnex are either trademarks or registered trademarks of Crestron Electronics, Inc. in the United States and/or other countries. Blu-ray is either a trademark or registered trademark of the Blu-ray Disc Association in the United States and/or other countries. Dolby, Dolby Atmos, and the double-D symbol are either trademarks or registered trademarks of Dolby Laboratories in the United States and/or other countries. DTS-HD Master Audio and the DTS logos and Symbol are either trademarks or registered trademarks of DTS, Inc. in the United States and/or other countries. HDBaseT and the HDBaseT Alliance logo are either trademarks or registered trademarks of the HDBaseT Alliance in the United States and/or other countries. HDMI and the HDMI Logo are either trademarks or registered trademarks of HDMI Licensing LLC in the United States and/or other countries. Kaltura is either a trademark or registered trademark of Kaltura, Inc. in the United States and/or other countries. Wowza is either a trademark or registered trademark of Wowza Media Systems, LLC in the United States and/or other countries. Other trademarks, registered trademarks, and trade names may be used in this document to refer to either the entities claiming the marks and names or their products. Crestron disclaims any proprietary interest in the marks and names of others. Crestron is not responsible for errors in typography or photography. Specifications are subject to change without notice. ©2016 Crestron Electronics, Inc.
Please use the shipping calculator to determine shipping.
See my
other items
where I have other scientific equipment for sale.
If you receive your item and it is not to your 100 Percent Satisfaction,
please contact us before leaving feedback.  I strive to make sure every transaction is a positive one!
I wanted to reach out and let you know that eBay is changing the way Sellers are rated.  I am not overjoyed with what's happening, but I have to roll with it.  IF you have a problem with my item, I would like you to use the "Contact Seller" link in the listing, or call me.  Please don't open a case.  Cases count against me even if they are resolved. I stand behind my items and will work out any problems that you may have with an item.  So please contact me if you have a problem with an item I have sold you and don't use the eBay Case as a means of communication
.
International Buyers, Please Note:
Import duties, taxes and charges are not included in the item price or shipping charges. These charges are the buyer's responsibility.
Please check with your country's customs office to determine what these additional costs will be prior to bidding/buying.
These charges are normally collected by the delivering freight
(shipping) company or when you pick the item up do not confuse them for additional shipping charges.
We do not mark merchandise values below value or mark items as "gifts".
US and International government regulations prohibit such behavior.