PC SATIN Air Gap Intake Manifold 283 305 327 350 383 400 SBC CHEVY & Gasket Set

Description

Small Block Chevy High Rise Dual Plane SATIN Aluminum Intake
Power Range: 1500-6500 RPM
Manifold Features:
SATIN Aluminum finish
180° dual plane high rise design for outstanding power from 1500 to 6500 RPM
Cast-in bosses on intake runners, can be drilled and tapped for nitrous injectors
Square bore carb bolt pattern for the Holley 4150/4160 style carburetor
Ideal port position - allows custom porting for maximum power
Dual distributor hold-down provisions for extra protection against distributor rotation
Four corner water outlets
Accepts late-model water neck, air-conditioning, alternator, & HEI brackets
Special adapter bushings allows manifold to fit 1987 to 1995 engines
Does not have provision for exhaust heated style choke
Manifold Specifications:
Part
Number
RPM
Range
Intake Port
Dimensions
Manifold
Height
22026
1500 - 6500
2.09" x   1.25"
(1)
4.65"
NOTE (1) - port is intentionally left small to allow for porting/gasket matching if desired
Procomp SATIN aluminum dual plane intake for small block Chevy. 180
0
high rise design, big power over a wide RPM range. Has the open air area under the carb pad to help keep fuel mixture cool and improve power. Ideal for everyday to high performance street applications, will produce power in the lower RPM range and not kill your bottom end like a single plane would.
Intake works with 283-400 small blocks up to 1995. Includes special adapter bushings for the middle holes on the '87 to '95 heads. Does not fit the newer Vortec heads. For use with square bore style carbs. Provides standard bosses and tapped holes for street accessories such as A/C and alternator brackets. No provision for manual choke or exhaust crossover and are not EGR equipped.
Included gasket set part # PC3284
Speedmaster intake gaskets seal even  small surface areas between ports.
A blend of nitrile rubber and cellulose fiber forms the base material, and a
silicone bead around each port increases sealing pressure. Compatible with
racing gas and alcohol fuel. Gaskets are 1/16” thick.
Comparable to FelPro # 1205
1.28" x 2.09" Port Dimensions.